Forum | Appery.io

I am a big fan of Tiggzi, but now I ran into a strange problem. I'll try to explain.

I have build the following:

When I save my app, wait some time and then reopen it, most of the times the width of the first cell is reduced with 8 pix to 28. It keeps getting smaller when saving and reopening. I have to readjust the width of the cell and the image inside the cell to the original values, which starts getting annoying:)

This is probably a hard-to-reproduce problem, but I can show it to you in my app.

Yes, please tell us how to reproduce the problem.

Go to my project Client Online (shared with support). Open the screen 'Accordering'. The left column of the grid in the upper list is 27 pix wide. The image inside it is also 27 pix. I have saved it as 36 (column) / 32 (image).

You can reproduce by setting the width of both elements to the correct width. Save the project exit and open some time later.

Hello! Got your project.
We'll test.

I was able to reproduce your problem - it's a bug. We'll fix it.

I have almost an identical problem. After ! make changes to my screen (maybe some minor adjustments) the width of my first cell is sometimes reduced to 30. I am trying to keep it to around 70 so I can see the whole input box located in this cell.

Keeps getting changes from this

to this:

Today I changed my table cell back to width=69. Saved and closed the project. When I opened it again it was now reduced from 69 (initial value) to 57.

Then I did one more small change on the page (removed or added a button). I then hit the save & close button on the project, and loaded it back again. Now the width value is 39 (!)

Do you know the status of this bug?

Ole.

We are still working on it...

Fixed.